DND Alignment Digital Download
$4.00
Make these DND Alignment speech bubbles your own! Made originally for a laser engraver to print at 1.5" wide. But it's an svg and png file so you can readily make it whatever size you need!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!
Make these DND Alignment speech bubbles your own! Made originally for a laser engraver to print at 1.5" wide. But it's an svg and png file so you can readily make it whatever size you need!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!
Make these DND Alignment speech bubbles your own! Made originally for a laser engraver to print at 1.5" wide. But it's an svg and png file so you can readily make it whatever size you need!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!
As a side note to help anyone who wants to use this to engrave with. I engrave on a Glowforge, using a transparent 1/8" acrylic set at the recommended settings with great success for keychains. For pins I use a 2-tone 1/8" acrylic settings 545/50 @340. These settings are what I have been successful with by are only recommendations. Always do test runs to figure out what works best for you.
Hope you love making these products!